MOBOTIX MxIRLight & MxSplitProtect

MxIRLight Series

• Weatherproof, high-performance infrared illuminator
• Supplied with power via network cable in conformity with the PoE+ standard (max. 19 W)
• For MOBOTIX cameras with night sensor, e.g., M16
• Six different beam angles ranging from 15° to 120°
• Maximum range of 20 to 160 meters
• Suitable for B036 to B237 lenses from MOBOTIX 

MxSplitProtect And MxSplitProtectHR

• Weatherproof installation box
• and separate hat rail (HR) module,
• each includes surge protection of up to 4 kV
• for connecting two IP cameras/PoE+ devices
• via a single Ethernet installation cable

MxIRLight I

Clear Images Even In Total Darkness

In most cases, extremely light-sensitive MOBOTIX cameras can be used even without artificial additional lighting. The long-lasting, weatherproof MxIRLight infrared illuminators have proven to be worthwhile in very dark or completely dark applications with lighting lower than 3 lux (in comparison, street lights provide 10 lux), especially for applications requiring intelligent analysis functions. 

MxIRLight II

Discreet Security Over Long Range

The light produced by the MxIRLight illuminator has a maximum range of 120 m and generates an infrared wavelength of 860 nm that is perfectly perceptible by a MOBOTIX camera with a black/white image sensor, yet only perceptible to the human eye as a red glimmer, in contrast to conventional white lights. With energy-saving LED technology (max. 19 W, PoE+ standard). 

MxIRLight III

Automatic On/Off Function

Thanks to the photosensor on the back of the device, the MxIRLight automatically switches on and off (once connected) when the sensor detects light conditions below the threshold of 3 lux - or above this threshold for periods exceeding 150 seconds. This has the advantage that the device does not manually switch off if the light increases briefly due to flashlights, headlights, lightning etc.

MxIRLight And MxSplitProtect

Easy To Install

The best method is to install the MxIRLight illuminator directly on the VarioFlex wall mount of a M16 or M26. Without having to lay an extra cable for the PoE illuminator, an M16 camera mounted, for example, on a pole and MxIRLight can be operated jointly via a single (existing) network cable, thanks to MxSplitProtect. 

MxSplitProtect

Versatile Installation Box For Outdoor Areas (IP66)

The MxSplitProtect enables users to connect a maximum of two IP/PoE devices using one Ethernet cable to the supplying PoE switch - protected against 4 kV power surges. In addition to new installations, existing video surveillance systems can also be expanded cost-efficiently. The MOBOTIX M1x/M2x/D26/Q2x camera series can optionally be mounted directly on the MxSplitProtect.

MxSplitProtectHR

Hat Rail Module For Electrical Cabinet

In addition to the PoE switch, the MxSplitProtectHR hat rail module is also required in indoor areas to connect two PoE devices (e.g., MOBOTIX cameras) to the MxSplitProtect via a single Ethernet installation cable. It transfers data and power from two PoE ports on the switch to the eight-wire installation cable, which is then split off again from the MxSplitProtect in outdoor areas.